Filler for 5 liter party kegs

If the beer is to be transferred from a large keg to a smaller 5-liter party keg, of course this will not work without the right accessories. So that the filling actually works as intended, you need a suitable Filler for 5-liter party kegs, as you can buy it here in our shop.

With counter pressure against the loss of carbon dioxide

As is well known, non-carbonated beer tastes stale and stale. The Filler for 5-liter party kegs can therefore generate counter pressure so that the carbon dioxide does not escape from the beer when it is decanted and nothing overflows. In this way, you can look forward to a tangy beer enjoyment.

Buy a Filler for 5 liter party kegs

Buy the practical Filler for 5 liter party kegs conveniently in our online shop and have your order delivered directly to your home. The Filler convinces with its simple handling, so that the filling of the beer succeeds without any problems with a little practice. We are therefore sure that you will also be completely satisfied with your purchase.

Operating instructions

Close all taps and valves Place the filling device on the 5-litre can, secure the retaining bracket with a screw Connect the CO2 hose to the pressure reducer Connect the beer hose to the brewing kettle, keg etc. Open the CO2 bottle, apply approx. 1.0 bar pressure to the can Open the beer tap on the kettle etc. and open the drain valve. and open filling device By opening the drain valve, you regulate the filling speed The can is completely filled when beer can be seen in the drain hose Close all taps and valves Allow residual pressure to escape with drain valve Remove filling device Close can with "Hermetic sealing plug" (item number 443410)