Cleaning container stainless steel for 3 fittings - Fittings exchangeable *without fittings*.

- Finish: stainless steel

- 3 Fittings

No cleaning agents that attack stainless steel may be used. Used fittings generally overhauled!

Why regular cleaning is important for dispensing systems
Beer is a food. For the operation of a tapping plant it applies therefore both in the private
area as well as in the catering trade, to pay attention to sufficient hygiene. Because with the
Time can be lost from the beer hoses to the calming queue and the tap
form deposits in the complete system.
These not only impair the taste of the beer, but also represent the
ideal breeding ground for germs and can therefore sooner or later even become a
become a health hazard.
By professional cleaning with a suitable cleaning container and
cleaning agents, this can be avoided and the tap system is reliably protected from deposits
free.

To use the cleaning container for your dispensing system
First fill the cleaning container with water and a suitable
Cleaning agent, which you can of course also order from our shop.
Now connect the cleaning container with a suitable plastic fitting to your
tap and open the tap.
As soon as cleaning fluid runs out, close the tap again. Now wait
for 20 to 25 minutes, so that the cleaning agent has time to remove dirt from the
to loosen beer lines. Then open the tap and let the complete
Cleaning water will flow out.
Afterwards you only have to clean the cleaning container twice completely with clear
Fill up with water and tap empty. In this way you rinse the remainder of the cleaning agent
from the plant. Once this is done, your dispenser is ready for use again.