Complete set beer dispenser STREAM 80K with air pump Beer case, flow cooler 2-line dry cooler
Consisting of:
- STREAM 80K with air pump Beer case, flow cooler 2-line dry cooler
- connections: John Guest
- 2x compressed air hose complete John Guest 5/16" to 3/4 screw on to screw on the tapping heads
- 2x beer hose complete John Guest 3/8" for 5/8 screw on to screw on the keg couplings
- 2x keg couplings of your choice (without keg couplings, 5 litre adapter, flat, combi, Köpi, triangular, basket)
Beer dispenser STREAM 80K beer case, through-flow cooler 2-line dry cooler, up to 90 liters / h
Beer case, through-flow cooler 2-line dry cooler, up to 90 liters / h
You can tap in just a few simple steps:
Unpack the dispenser
Connect the pressure reducer to the CO2 bottle with the carbon
dioxide key and tighten it
Connect the CO2 hose from the pressure reducer to the dispensing head
Connect the beer hose to the dispensing head, plug it into the dispensing system
and fix it
Pierce the barrel
Set the dispensing pressure on the pressure reducer
Connect the dispenser to the socket
Adjust the pressure and enjoy a cold beer
The STREAM 80K beer cooler is in the “Dispensing systems
up to 90 l / h” category, one of the best in terms of
cost, performance and quality ratio.
With the following cleaning set, you can
clean the STREAM 80K dispenser easily and
conveniently after use:
Cleaning set Easy (recommended)
The noble STREAM 80K dry cooler with a weight
of only 45 kg is equipped with a 7mm cable.
Dimensions: W / D / H / 255х635х510 (including drip tray)
Voltage: 220V, 50 Hz, 804W, 4,35
Compressor:3/8 PS
Management:2 x types of beer
Casing:Metal, powdered, rust-proof
High quality of workmanship and packaging
The thermoblock of the STREAM 80K beer dispenser has a high energy capacity,
This means that a perfectly chilled beer can be tapped after just 5-10 minutes. If
the thermostat is set to max., the thermoblock (after approx. 10 minutes)
Accumulate a large amount of energy, thereby enabling several chilled beers to be served one after the other.
The cooling technology of the STREAM 80K dispenser is around 45% more efficient than the electrical power consumption.The beer is cooled down to the tap.
The cooling loops are made of stainless steel and are therefore stable
and durable The materials used meet the highest hygiene standards and enable the cooler to have a long service life.
With its strong cooling performance and perfect dimensions, the dispensing system STREAM 80K is one of the leading 2-pipe table / under-table coolers on the market.
Cooling capacity of 170 to 180 glasses (0.5 liters) of excellent chilled beer per hour,
The powerful STREAM 80K compressor ensures minimal energy consumption and an excellently chilled beer without foaming
The thermoblock (after approx. 10 minutes) will get a high amount
to accumulate in energy, and thereby a serving of
allows several chilled beers in a row.
The cooling technology of the STREAM 80K dispenser is around 45%
more efficient than the electrical power consumption.
The beer is cooled down to the tap.
The cooling loops are made of stainless steel and
thus stable and durable.
hygiene standards and enable the cooler to have a long service life.
Continuous cooler, dry cooler
Unpack for 3 minutes… set up for 2 minutes… connect for 1 minute = unlimited enjoyment.
A cold, clear, freshly tapped one - you deserve it!
The beer cooler STREAM 80K 2lt is for professional cooling and serving
of excellently chilled beer at home, at garden parties
and intended for medium-sized commercial use.
Control range
+2 to +10 degrees
Power:
90 L / h at 10 ° C TD
Cooling technology
is 45% more efficient
Ready to use
in just 5-10 minutes
