JET 30K 1-line beer dispenser dry cooler with air pump, 30 liter/h beer case, flow cooler
You can tap in a few simple steps::
1. Unpack the dispenser
2. Connect the compressed air hose to the tap head
3. Connect the beer hose to the tap head and insert and fix it
in the tap system
4. Pierce the barrel
5. Connect the dispensing system to the socket
6. Set pressure and enjoy cool beer
You can find all the components in the complete set or as accessories in our shop
The beer cooler JET 30K is in the category "dispensing
systems up to 30 l / h", one of the best in terms of cost,
performance, quality.
With the following cleaning sets, you can easily and
conveniently clean the JET 30K dispenser after use:
Easy cleaning set (recommended)
The noble JET 30K dry cooler with a weight of only 14.5 kg is equipped with a 7mm line.
Dimensions:W / D / H / 167/281 / (including drip tray) / 368 mm
Voltage 230V, 50 Hz, 267W, 1.16A
Compressor:1/8 HP
Management:1 x beer
Housing:metal, powder-coated, rust-proof
High quality of workmanship and packaging
The thermoblock of the JET 30K beer dispenser has a high energy capacity, so
a perfectly chilled beer can be tapped after only 2-4 minutes If the thermostat is
set to max., The thermoblock (after approx. 10 minutes) will accumulate a large
amount of energy, which will enable several chilled beers to be served in succession. The cooling technology of the JET 30K dispenser is around 45%
more efficient than the electrical power consumption
- The beer is cooled down to the tap.
- No use of CO2 required - integrated air pump ensures carefree
and mobile tapping.
- The cooling loops are made of stainless steel and are therefore
stable and durable
The materials used meet the highest hygiene standards and enable the cooler
to have a long service life.
With its strong cooling capacity and perfect dimensions, the dispenser JET 30K is one of the leading table / under - table coolers on the market.
Cooling capacity of 40 to 60 glasses (0.5 liters) of excellent chilled beer per hour.
The powerful compressor JET 30K ensures minimal energy consumption and an
(after approx. 10 minutes) is able to absorb a high amount
accumulate energy, and thereby provide a supply of several
cooled beers in a row.
The cooling technology of the JET 30K dispenser is around
45% more efficient than electrical power consumption.
The beer is cooled down to the tap.
The cooling loops are made of stainless steel and
thus stable and durable.
The materials used correspond to the highest hygienic
standards and enable a long service life of the cooler
Unpack for 3 min ... set up for 2 min ... connect for 1 min = enjoy indefinitely
without CO2. A cold, clear, freshly tapped - you deserve it!
The beer cooler JET 30K is for professional cooling and serving of excellently
chilled beer, without the use of CO2 thanks to the integrated air pump for
pressure generation. at home, at garden parties and for small commercial use.
Control range
+2 to +10 degrees
capacity:
30 L/h at 10°C TD
Cooling technology
is 45% more efficient
Ready for use
in only 2-4 minutes
